How to Connect Canon mg3620 Printer to WiFi?

The Canon MG3620 printer allows you to connect the device through a Wi-Fi network. Share this printer with everyone in your home or office without the need to use cables. Go with the upcoming procedure to configure your printer wirelessly and know how to connect canon mg3620 printer to wifi.

How to Connect Canon MG3620 Wirelessly Using Printer’s Control Panel?

Hold the Wi-Fi button on your Canon printer until the On light glows.
Press the Color button and then tap the Wi-Fi button.
Check if the Wi-Fi light glows and the On lamp remains lit.
Install the printer driver and software on your computer to continue the wireless setup.
Insert the installation disc into the CD Drive.
The setup program starts automatically.
An Installation Completed Successfully message displays on the screen.
Click Exit to finish the setup and start printing.

Canon Pixma MG3620 Wireless Setup

To begin the wireless setup, make sure that you have turned On the Canon printer. The On lamp on the printer remains lit if the device is turned On. Wait for the Canon printer to complete the cleaning, printhead alignment or any other ongoing process before starting the setup and work on how to connect canon mg3620 printer to wifi.

Press the Stop button on the Canon printer to turn Off the Wi-Fi lamp that is flashing. Choose a connection method to set up the printer through a Wi-Fi network. The Cableless setup method may take some time. The internet connection may not be available during the wireless setup to connect canon mg3620 printer to wifi.

The cableless setup is not available on Windows RT and Chrome operating systems. Establish wireless router information to the Canon Pixma MG3620 printer right from your smartphone without operating the access point. You need to run the installation program for executing a cableless setup on your Windows or MAC device.

The Windows and Mac software installer are available on our website. Also, use the Canon PRINT Inkjet or SELPHY application to execute a cableless setup on your Android and iOS devices. Get more instructions on how to use the apps with an Android or iOS device from our site.

Hold the Wi-Fi button present on the printer until the On light glows. Press the Black button and then tap the Wi-Fi button. Check if the Wi-Fi light glows and the On lamp remains lit. Long press the button on the wireless router within two minutes and ensure that the Wi-Fi and the On lamps remain lit, which helps on to connect canon mg3620 printer to wifi.

A wireless connection can also be established using the WPS PIN method. Hold the Wi-Fi button until the On lamp blinks. A wireless connection setting information page gets printed along with the PIN code. Long press the Stop button on your printer and wait for the Alarm light to blink sixteen times.

Release the Stop button after the 16th flash. Go with the instructions displayed on the screen of your smartphone to finish the setup. Set the code that is described on the printed (Network configuration) page to the wireless router. Finally, ensure that the Wi-Fi light on the printer remains lit. That’s it about the instruction for how to connect canon mg3620 printer to wifi.

Procedure for HP Deskjet 2540 Printer Setup

  Tear the tape on top of the printer’s shipment box to open it. Take the printer and its resource materials out of the box.

  Discard all packing materials surrounding the printer. The resource materials are a USB cable, power cable, ink cartridges, and software installation CD.

  Place the printer on a flat surface. Use the power cable to HP Deskjet 2540 Setup to the electrical socket.

  Plug one end of the cable to the printer’s rear and the other end to the wall socket. Switch on the printer by pressing the Power button.

  Pull the input tray and its extender. Remove all the packing materials in it. Insert plain sheets of paper into the input tray.

  Take the ink cartridges out of the package. Remove the protective tape on top of it. Handle the cartridges using only the black plastic .

  Install the black ink cartridges into the right slot and the color ink cartridges into the left slot respectively.

  Wait for the printer to print an alignment page. After the printer prints it, the printer’s hardware is configured.

  The system prompts to install the HP Printer driver and software. There are different ways to install the driver. Some of them are mentioned on this website.

How to Setup HP Deskjet Ink Advantage 2135 Printer?

Remove the seal on the box. Take the protective cover inside the box and keep them aside. Take the printer from the box.

  Remove all the tape from inside the printer. Lower the output tray, and ink cartridge access door to open it. Remove all the tape and packing materials inside the printer.

  Close the ink cartridge access door. Check if all the materials from the box are kept aside before discarding it.

  At this stage, do not use the USB cable to connect the printer and the computer. Plug it in during the driver 123.hp.com/setup 2135.

  Connect the outlet end of the power cord to the rear of the printer and the other end to the electrical outlet. Push the power button to switchon the printer. The printer makes a noise and carriage moves.

  Use the setup cartridge that comes in the shipment box. Try to use the original ink cartridge for the best print quality.

  Raise the 123.hp.com/dj2135 printer input tray. Remove any paper present in the input tray. Slide the paper width guides to the left as far as possible.

  Load the stack of paper into the input tray and push the stack into the tray until it stops.

  Move the paper width guide to the right and push it until it rests at the edge of the paper. Lower the output tray and pull output tray extender. Install the driver on the computer.

  After setting up the HP Printer. Print a test page to confirm the printer setup.